Hi from Tassie

Say Hi and introduce yourself

Re: Hi from Tassie

Postby Carol » Wed Jun 09, 2021 5:00 pm

Good work on getting the stripping runs done.
I am guessing that they don''t worry too much about temperature correction. I don't think it will matter much in this learning phase as you will doing cuts anyway.
I always find it helpful to make notes of my runs so I can refer back if necessary.

Cheers
Carol
Carol
Site Donor
 
Posts: 316
Joined: Thu Feb 14, 2019 1:29 pm
Location: South Australia
equipment: Still Spirits Air Still
FSD 2" Boka (aka Boris)
FSD 2" pot still ( aka Natasha)

Re: Hi from Tassie

Postby Wellsy » Wed Jun 09, 2021 5:30 pm

Just be aware the stripping run will take a lot longer than the stripping run mate , sorry I can’t remember how much longer memory has failed but I am th8nking it was double the amount of normal run time.
Wellsy
Site Donor
 
Posts: 1397
Joined: Sat Aug 22, 2020 7:48 am
Location: Victoria
equipment: FSD 4” Modular Pot Still plus 4 FSD Bubble plates on FSD 50 ltr Milk Can Boiler + 2 x 2400W FSD Element and Guard Kits

Re: Hi from Tassie

Postby Carol » Wed Jun 09, 2021 5:36 pm

Wellsy - I think you mean the spirit run will take longer than the stripping run.
Cheers
Carol
Carol
Site Donor
 
Posts: 316
Joined: Thu Feb 14, 2019 1:29 pm
Location: South Australia
equipment: Still Spirits Air Still
FSD 2" Boka (aka Boris)
FSD 2" pot still ( aka Natasha)

Re: Hi from Tassie

Postby Wellsy » Wed Jun 09, 2021 5:59 pm

Absolutely what I mean Carol

I am so pleased someone on here has studied mind reading lol

Sorry guys Carol is bang on the money.the spirit run will take much longer than the stripping run
Wellsy
Site Donor
 
Posts: 1397
Joined: Sat Aug 22, 2020 7:48 am
Location: Victoria
equipment: FSD 4” Modular Pot Still plus 4 FSD Bubble plates on FSD 50 ltr Milk Can Boiler + 2 x 2400W FSD Element and Guard Kits

Previous

Return to Welcome Centre



Who is online

Users browsing this forum: No registered users and 7 guests

cron

x