I have an airstill and a 20l pot still with a 38 inch Liebig 15mm over 28mm with a 2kw element.
My main issue after running a batch is the cool down time. This is especially an issue with the airstill. If I let it cool down between runs this takes literally 4 to 5 hours.
Is it safe to open the boiler lid, pour the steaming junk left in the boiler after a run down the drain then straight away refill the boiler and start another run?
My main concern is alcohol vapours. Could these vapours pose a health risk if I open the boiler and empty it straight after a run finishes?
I did try this with the airstill though I done it outside for maximum ventilation.