vinigar/water run.

Just starting out and need some advise? then post it in here.

vinigar/water run.

Postby jman69 » Sat Jan 08, 2022 1:48 pm

Hi there, just wondering about doing a cleaning run. I know vin.water in a 50/50 mix is the go, but need to know how much wash to make up? I"m assuming it's not a whole boiler full? Thanks in advance.
jman69
 
Posts: 54
Joined: Sun Apr 14, 2019 6:57 pm
equipment: reflux

Re: vinigar/water run.

Postby BigRig » Sat Jan 08, 2022 2:08 pm

Depending on what your boiler is and whether you have exposed elements or not, half a boiler full will be enough. When doing vinegar run i was happy with an hour of running at full power with no reflux.
BigRig
 
Posts: 768
Joined: Sun Apr 07, 2019 1:29 pm
Location: Brisbane, QLD
equipment: FSD 4" Mac SSG, 50L Milk Can, 2 x 2400w elements, 35L Digiboil Boiler, Airstill.

Re: vinigar/water run.

Postby jman69 » Sat Jan 08, 2022 2:31 pm

ok, it"s only a t500. So, about 12 litres and no saddles. Thanks big rig.
jman69
 
Posts: 54
Joined: Sun Apr 14, 2019 6:57 pm
equipment: reflux

Re: vinigar/water run.

Postby The Stig » Sat Jan 08, 2022 2:34 pm

You don’t need to do a vinegar run with a T500.
Just do a sacrificial run and your done
The Stig
Site Nerd
 
Posts: 18471
Images: 9
Joined: Sun Jun 19, 2011 8:37 am
equipment: Only the Best will Do.
Mac4 SSG Bubbles of Joy

Re: vinigar/water run.

Postby BigRig » Sat Jan 08, 2022 2:53 pm

The Stig wrote:You don’t need to do a vinegar run with a T500.
Just do a sacrificial run and your done


+1
BigRig
 
Posts: 768
Joined: Sun Apr 07, 2019 1:29 pm
Location: Brisbane, QLD
equipment: FSD 4" Mac SSG, 50L Milk Can, 2 x 2400w elements, 35L Digiboil Boiler, Airstill.


Return to Beginners Questions



Who is online

Users browsing this forum: No registered users and 39 guests

x