by Bustah » Thu Oct 26, 2023 2:59 pm
Hey guys! I'm onto my second spirit run on the FSD 2" boka (first went well, albeit a bit slow, ended up with 600ml super clean at 92% and 400ml a touch less so at 91%, rest went back into this next run without the fores/heads or tails)
Quick question about collection rate, it's a 22L TFFV stripped to 4.8L at 42%, watered down and the not so clean hearts from the last lot in gave me around 6.4L at 40%. i've got 5 rolls of copper in at the moment, if i collect at 100ml/15 minutes it tastes super clean, if i try to increase it at all to the collection rate i've seen thrown around in the thread, it starts tasting not great, definitely more burny.
I'm working with the digiboil, 1900w turned on and volt meter turned down to 12 out of 22.
Would the issue be the voltage? Should i add some more copper? (i'm rolling up another 3 to test for the next run) or am i just being too picky? lol..
Also wanted to check, if i was to do 3 stripped runs instead, would i be looking at tripling my run time or does it work out to be quicker per wash? Because at the moment i'm at 6 hours and still not quite done, not sure if i could do an 18 hour run :laughing-rolling: