Never forget what made you happy first...a pot!
At 23c btw in case anyone asks
Image015.jpg
The dance of the devil
Image013.jpg
This ball valve has got to go...1/2" movement equals 10 abv pts it's just not fine enough...tomorrow a 10 + wind gate valve goes in
Image019.jpg
Speed test
That's a good .5lt plus some in a bees dick(5min 32 sec) @95% + and no adjustment to temp...happy to say the least! :happy-partydance: :happy-partydance:
Image020.jpg
a few comments...
Ball valve is crap it gets replaced tomorrow. You where right EG...it's precision needed here
Dam it's f'ing quick Like I'm staggered at how it belts out
It's easier to drive than expected... just run it on reflux
I've plenty of heat left to play with even with the retro 3 ring on std regulator
Those dumb looking feet and face cups piss spirit all over the plate below like it's a spray effect...much better than expected :happy-partydance: :happy-partydance:
Not all plates work equally...need to spend some thinking time on this
Heads compress, then heats flow then tails is like a complete plate deload
The bypass forces the remaining 4 plates to work like bastards...fully loaded and a 5- 8% abv change
that's about all I can think off for now...tomorrow 2 x 60 lt washes get the treatment as per EG's request for a neutral wash test
happy as :happy-partydance: :happy-partydance:
bt1
You do not have the required permissions to view the files attached to this post.