I've being doing some research as to what works and different condensers and so on. I've drawn up a bit of a design on what I want to build but would like some feedback as to what needs improving or changing before I build it.
I've added the picture as attachment.
Already have the keg boiler setup. It will be stainless except for the tube coming out from the LM needle valve and the main reflux condenser which will be copper. With the cup trap to the LM side, I did'nt know if it needs the slnt plate below the condenser, above the 2"-1" reducer to catch more product or would create a vapour path blockage to the reflux condenser.
I was going to have a double wound coldfinger for the reflux condenser in 3" stainless, 2" column and the 1" line out to 2" shotgun condenser for the VM then reduced to 3/4" into collection jar.