Stopping and starting a run

Discuss safety issues here.

Stopping and starting a run

Postby Sparrow » Fri Aug 25, 2017 2:16 pm

So my mate and I ran a CFW couple of weeks ago, we collected fores and then something came up so we had to shut down the still.

We left the wash in the boiler and then a couple of days later he ran it again himself. He collected some more fores, I think about 400ml from a 40 litre wash as we don't use early heads anyway.

He then made an apple g dropper with it. He said he ate some of that soaked apples and tasted some of the spirit and since he's been getting really crook.

I assured him it's probably coincidence and he's probably just sick but he's worried it's from the run, and maybe leaving it made it go bad. I did cuts with him and I've been fine but I haven't drank any of the end product.

Is there any risk in letting the wash sit after boiling then running again a couple of days later? Or is there any issue in soaking apple slices?
Sparrow
 
Posts: 155
Joined: Fri Mar 03, 2017 2:30 pm
Location: Vic
equipment: 4 plate bubbler on a 50l keg boiler.

Re: Stopping and starting a run

Postby coffe addict » Fri Aug 25, 2017 3:31 pm

Pure coincidence, I've shut down for various reasons many times with no issues.
coffe addict
 
Posts: 1027
Joined: Thu Feb 26, 2015 12:00 pm
Location: Brisbane central
equipment: 18 gal keg boiler on its side on wheel's with fill port, 1in drain and 2x2.4kw elements
4in 5 plate modular blockhead with optional infusion basket

Re: Stopping and starting a run

Postby Plumby » Fri Aug 25, 2017 4:03 pm

coffe addict wrote:Pure coincidence, I've shut down for various reasons many times with no issues.

:text-+1:
Plumby
 
Posts: 1175
Joined: Sat Aug 02, 2014 7:19 am
Location: South East Queensland
equipment: 50 litre keg boiler with a 2200watt element and a 2 inch pot still called Shaniqua with a 32mm over 19mm 800mm long liebig condenser attached.

Re: Stopping and starting a run

Postby Zak Griffin » Fri Aug 25, 2017 9:10 pm

I had a CFW wash up to temp 5 times before I actually run it a while ago... Definitely not an issue.

There's even theories of it creating favourable esters!
Zak Griffin
Lifetime Member
 
Posts: 6832
Joined: Mon Jul 15, 2013 9:34 pm
Location: Radelaide
equipment: "The Heart of Gold" - 4" Bubbler - finally bubbling!
"Zaphod" - 3" Pot - retired
"Agrajag" - 6" Bubbler - midlife crisis build?

Re: Stopping and starting a run

Postby EziTasting » Sun Aug 27, 2017 10:05 am

Zak Griffin wrote:There's even theories of it creating favourable esters!


Has this ever been tested? I'm guessing you haven't...?

Sounds interesting but also like a waste of energy and time... still, interesting!
EziTasting
 
Posts: 2085
Joined: Fri Sep 25, 2015 5:15 pm
Location: FNWA
equipment: Newbie - Keg Boiler & 4" 4 plate glasser


Return to Safety Discussion



Who is online

Users browsing this forum: No registered users and 17 guests

x