Different condenser

Parrots beaks, valves, condensers, and all other hardware for stilling.

Different condenser

Postby googe » Fri May 20, 2016 6:26 pm

Made this some time ago, just for something different and had to satisfy a brain fart lol. It's pretty much, three liebigs, with reservoirs on the ends.
You do not have the required permissions to view the files attached to this post.
googe
 
Posts: 136
Joined: Sat Apr 02, 2016 2:23 pm
Location: Nz
equipment: Single.plate cm

Re: Different condenser

Postby bluc » Fri May 20, 2016 6:36 pm

How is knockdown power?
bluc
Site Donor
 
Posts: 9035
Joined: Tue Apr 14, 2015 5:47 pm
Location: sunshine coast
equipment: 2" pot with 2" shotty 400mm long 5x 1/2" on a t500 boiler.
50l keg boiler 4" still mount 4" sight glass 1" drain..
4 plate 4" bubbler, 600mm packed section

Re: Different condenser

Postby googe » Fri May 20, 2016 7:01 pm

I run gas, so cant say what power. But lower than my 500mm x 4 1/2" shotgun. I should have made it a bit longer.
googe
 
Posts: 136
Joined: Sat Apr 02, 2016 2:23 pm
Location: Nz
equipment: Single.plate cm

Re: Different condenser

Postby Redux » Fri May 20, 2016 7:06 pm

bluc wrote:How is knockdown power?


should be slightly better than a 3 core shotgun?
Redux
 
Posts: 879
Joined: Thu Mar 06, 2014 7:08 am
Location: NZ and no longer homeless!
equipment: 5 plate bubbler with 500mm packed section on a 50lt gasser keg ...
set up in a wee shed....

Re: Different condenser

Postby bluc » Fri May 20, 2016 7:10 pm

Doesn't make sense isn't it just a short tank either end wouldn't it be less effective than a 3 core shotgun. Which has cooling liquid full length?
bluc
Site Donor
 
Posts: 9035
Joined: Tue Apr 14, 2015 5:47 pm
Location: sunshine coast
equipment: 2" pot with 2" shotty 400mm long 5x 1/2" on a t500 boiler.
50l keg boiler 4" still mount 4" sight glass 1" drain..
4 plate 4" bubbler, 600mm packed section

Re: Different condenser

Postby Redux » Fri May 20, 2016 7:14 pm

bluc wrote:Doesn't make sense isn't it just a short tank either end wouldn't it be less effective than a 3 core shotgun. Which has cooling liquid full length?

not if the passive cooling on the colums is cooler than the warm surrounding water would be.
Redux
 
Posts: 879
Joined: Thu Mar 06, 2014 7:08 am
Location: NZ and no longer homeless!
equipment: 5 plate bubbler with 500mm packed section on a 50lt gasser keg ...
set up in a wee shed....

Re: Different condenser

Postby bluc » Fri May 20, 2016 7:16 pm

Ok interesting cheers :-B
bluc
Site Donor
 
Posts: 9035
Joined: Tue Apr 14, 2015 5:47 pm
Location: sunshine coast
equipment: 2" pot with 2" shotty 400mm long 5x 1/2" on a t500 boiler.
50l keg boiler 4" still mount 4" sight glass 1" drain..
4 plate 4" bubbler, 600mm packed section

Re: Different condenser

Postby Bushy » Fri May 20, 2016 7:27 pm

Hey Googe. :greetings-waveyellow: Long time no see.
Weren't you making an adjustable RC at some stage? Did it work?
Bushy
 
Posts: 1003
Images: 0
Joined: Sun Jun 17, 2012 8:25 am
Location: Crabland, West Australia
equipment: 50l keg boiler with 5Star 3600 watt element
4 inch plated column. 4 perf plates.
Lava Rock Behemoth

Re: Different condenser

Postby scythe » Sat May 21, 2016 7:34 am

Looks like a lot more effort than a shotgun.
All a shotgun dose is reduce the length of a leiberg.
Ie instead of having a 2m leiberg you can have a 500m 4core shotgun condenser.
scythe
 
Posts: 1860
Joined: Thu Nov 14, 2013 6:34 am
Location: Central West NSW
equipment: Dreaming of a 4" bubbler

Re: Different condenser

Postby googe » Sat May 21, 2016 9:51 am

It has water running through the entire length bluc. Gday bushy, nice to see you mate. I've thought about adjustable ones but never built one lol.
googe
 
Posts: 136
Joined: Sat Apr 02, 2016 2:23 pm
Location: Nz
equipment: Single.plate cm

Re: Different condenser

Postby CaptainRedBeard » Sat May 21, 2016 11:40 am

That looks awesome googe! You got some skills at brazing copper to ss. Flawless joints from what I can see.

I've never seen anyone use a plate for a flange either, and having those vapor tubes exposed before it enters the leibig looks wicked! Might be getting a little aroused!
CaptainRedBeard
 
Posts: 499
Joined: Sun Sep 07, 2014 10:10 am
Location: Central Coast, NSW
equipment: 2" SS Column Reflux Keg Still
2" Copper Pot Still w shotgun condenser
Kelvinator Fridge Fermenter

Re: Different condenser

Postby googe » Sat May 21, 2016 1:04 pm

Thanks mate. should have explained in more detail, lazy lol. It's not ss, it's copper nickel for the outer jackets, shines up nice and looks similar to ss in the right light. I used to get it for nothing at my last job, it's used in ship building. I hadn't welded anything in the pics, there just assembled pics, I soft soldered it all up afterwards, was probably the most challenging soldering I've ever done, lots of swear words involved :)). I like the end plate flange, was such a simple solution it's so easy!. This one has been scraped now, I tend to build and recycle lol. I am planning a bigger and better one in the very distant future.
googe
 
Posts: 136
Joined: Sat Apr 02, 2016 2:23 pm
Location: Nz
equipment: Single.plate cm

Re: Different condenser

Postby WTDist » Sat May 21, 2016 1:37 pm

How thick is the end plate flange?
WTDist
 
Posts: 2
Joined: Sun Oct 05, 2014 11:32 am
Location: Brisbane
equipment: Building a 4" bubbler with 8" glass thumper

Re: Different condenser

Postby Doubleuj » Sat May 21, 2016 2:48 pm

I'd call it a Liebig revolver
Doubleuj
Lifetime Member
 
Posts: 3630
Joined: Fri Jan 16, 2015 7:15 pm
Location: rockhampton qld
equipment: 4" stainless glasser

Re: Different condenser

Postby googe » Sat May 21, 2016 4:29 pm

I make all my plates etc using flattened 2" wtdist, from.memory it's 1.2~1.6mm?. Others on other sites refered to it as a gatlin double uj, but it's not lol.
googe
 
Posts: 136
Joined: Sat Apr 02, 2016 2:23 pm
Location: Nz
equipment: Single.plate cm

Re: Different condenser

Postby Bushy » Sat May 21, 2016 8:48 pm

Might have been Yummy. Never Mind. Good to see ya dude.
So what's to gain with yr shotgun mod?
Bushy
 
Posts: 1003
Images: 0
Joined: Sun Jun 17, 2012 8:25 am
Location: Crabland, West Australia
equipment: 50l keg boiler with 5Star 3600 watt element
4 inch plated column. 4 perf plates.
Lava Rock Behemoth

Re: Different condenser

Postby maddogpearse » Sun May 22, 2016 8:40 am

Haha seems like way more effort than its worth, but it looks bloody fantastic! :handgestures-thumbupleft:
maddogpearse
 
Posts: 477
Joined: Wed Jun 10, 2015 2:11 pm
Location: Bendigo - Victoria
equipment: 4 plate single cap primus glass bubbler. Optional 600mm packed section. Block head with 3" Shotgun PC
50L Keg with 5000W electric elements.

Re: Different condenser

Postby 1 2many » Sun May 22, 2016 8:21 pm

Bushy wrote:Might have been Yummy. Never Mind. Good to see ya dude.
So what's to gain with yr shotgun mod?


G'day bushy iirc it was yummy that had that idea. :handgestures-thumbupleft:
1 2many
Lifetime Member
 
Posts: 4217
Joined: Sun Jan 27, 2013 6:08 am
Location: Where the sun shines
equipment: Portable A.G brewery ,#001 5 STAR blockhead 4" Modular 4 plate SSG with,6"inline thumper, 2.5" 9 tube shotgun, packed section, Boiler 50 ltr inverted keg 4"still mount, 2.4 Kw FSD elements 1"drain.

Re: Different condenser

Postby googe » Wed May 25, 2016 12:27 pm

Yep, was yummy!. No gain bushy, just some fun :handgestures-thumbupleft:
googe
 
Posts: 136
Joined: Sat Apr 02, 2016 2:23 pm
Location: Nz
equipment: Single.plate cm


Return to Accessories



Who is online

Users browsing this forum: No registered users and 10 guests

x