Ako's keg insulation project

Boiler, burner and boiler modification talk.

Ako's keg insulation project

Postby ako1978 » Wed Jun 10, 2015 12:08 pm

I decided I wanted to help make my heat up time quicker by insulating my boiler with timber. As I run an electric element I decided that using timber was the go. Cheap and easy to work with (long as you have some basic tools). Timber has such great insulation properties and make the boiler a lot safer to be around :-D
A 6m lenght of timber 90mm x 35mm pine and a small sheet of ply should do the job
You do not have the required permissions to view the files attached to this post.
Last edited by Sam. on Thu Jun 11, 2015 4:51 pm, edited 1 time in total.
Reason: Changed title
ako1978
 
Posts: 19
Joined: Fri Jul 19, 2013 6:31 pm
Location: eyre pennisula
equipment: 50l keg boiler FSD MAC4 SSG and packed section

Re: Ako's keg insulation progect

Postby ako1978 » Wed Jun 10, 2015 12:23 pm

[album][/album]
You do not have the required permissions to view the files attached to this post.
ako1978
 
Posts: 19
Joined: Fri Jul 19, 2013 6:31 pm
Location: eyre pennisula
equipment: 50l keg boiler FSD MAC4 SSG and packed section

Re: Ako's keg insulation progect

Postby ako1978 » Wed Jun 10, 2015 12:29 pm

image.jpg
You do not have the required permissions to view the files attached to this post.
ako1978
 
Posts: 19
Joined: Fri Jul 19, 2013 6:31 pm
Location: eyre pennisula
equipment: 50l keg boiler FSD MAC4 SSG and packed section

Re: Ako's keg insulation progect

Postby ako1978 » Wed Jun 10, 2015 12:34 pm

image.jpg
You do not have the required permissions to view the files attached to this post.
ako1978
 
Posts: 19
Joined: Fri Jul 19, 2013 6:31 pm
Location: eyre pennisula
equipment: 50l keg boiler FSD MAC4 SSG and packed section

Re: Ako's keg insulation progect

Postby HillsJester » Wed Jun 10, 2015 12:36 pm

throw some hoops around it and will look like a barrel boiler. love it!
HillsJester
 
Posts: 58
Joined: Sun Aug 18, 2013 2:16 pm
Location: Adelaide
equipment: 50 ltr keg boiler and FSD SS pot still

Re: Ako's keg insulation progect

Postby ako1978 » Wed Jun 10, 2015 12:40 pm

image.jpg
You do not have the required permissions to view the files attached to this post.
ako1978
 
Posts: 19
Joined: Fri Jul 19, 2013 6:31 pm
Location: eyre pennisula
equipment: 50l keg boiler FSD MAC4 SSG and packed section

Re: Ako's keg insulation progect

Postby Zak Griffin » Wed Jun 10, 2015 1:25 pm

Definitely run 3 or 4 bands around it!

Looking good mate :handgestures-thumbupleft:
Zak Griffin
Lifetime Member
 
Posts: 6832
Joined: Mon Jul 15, 2013 9:34 pm
Location: Radelaide
equipment: "The Heart of Gold" - 4" Bubbler - finally bubbling!
"Zaphod" - 3" Pot - retired
"Agrajag" - 6" Bubbler - midlife crisis build?

Re: Ako's keg insulation progect

Postby ako1978 » Wed Jun 10, 2015 1:29 pm

image.jpg
I do not have my still set up all the time so I have made this in 2 halves and hinged it so I can put it on once it's set up and easy to take off when I need to empty the boiler :happy-partydance:
You do not have the required permissions to view the files attached to this post.
ako1978
 
Posts: 19
Joined: Fri Jul 19, 2013 6:31 pm
Location: eyre pennisula
equipment: 50l keg boiler FSD MAC4 SSG and packed section

Re: Ako's keg insulation progect

Postby rumdidlydum » Wed Jun 10, 2015 6:46 pm

Thats awsome love it :handgestures-thumbupleft:
rumdidlydum
 
Posts: 2619
Joined: Sun Oct 27, 2013 7:20 pm
Location: CQ
equipment: The infamous Illuminated chicken leg boiler, Rum glass and other bits and bobs

Re: Ako's keg insulation progect

Postby Whiskyaugogo » Wed Jun 10, 2015 8:39 pm

Awesome job mate!!! :handgestures-thumbupleft:
Whiskyaugogo
Site Donor
 
Posts: 649
Joined: Mon Jun 16, 2014 2:48 pm
Location: Canberra, Australia
equipment: To be updated

Re: Ako's keg insulation progect

Postby 5 o'clock » Wed Jun 10, 2015 9:53 pm

Cool job Ako,

For those who have insulated their boilers like this, what is your experience regarding increased heating efficiency?

I have wrapped my keg in a thin layer of foam matting but not sure if I should go for something with better properties like this.

Appreciate any advice.

Thanks,

Richard
5 o'clock
 
Posts: 404
Joined: Mon May 06, 2013 7:07 pm
Location: Northern N.S.W. (Yeehaa country)
equipment: Modular bubble plate still on a keg with 2 elements. Mostly run it as a pot so far.

Re: Ako's keg insulation progect

Postby TheMechwarrior » Wed Jun 10, 2015 10:21 pm

Bloody ripper of a job mate, congratulations!
TheMechwarrior
 
Posts: 1007
Joined: Mon Dec 05, 2011 1:43 pm
Location: Tasmania
equipment: Five Star Distilling 6" neutraliser with
100L boiler

Re: Ako's keg insulation progect

Postby ako1978 » Thu Jun 11, 2015 3:41 pm

Thanks guys just noticed I spelled project wrong :angry-banghead: gave it 2 coats of stain and clear, came up a treat :D :D :D
You do not have the required permissions to view the files attached to this post.
ako1978
 
Posts: 19
Joined: Fri Jul 19, 2013 6:31 pm
Location: eyre pennisula
equipment: 50l keg boiler FSD MAC4 SSG and packed section

Re: Ako's keg insulation progect

Postby ako1978 » Thu Jun 11, 2015 3:43 pm

Finished now for a few timed runs to see how much different it makes
You do not have the required permissions to view the files attached to this post.
ako1978
 
Posts: 19
Joined: Fri Jul 19, 2013 6:31 pm
Location: eyre pennisula
equipment: 50l keg boiler FSD MAC4 SSG and packed section

Re: Ako's keg insulation progect

Postby Professor Green » Thu Jun 11, 2015 3:52 pm

Nice work.

It will be interesting to hear how much of an improvement you get.

Cheers,
Prof. Green.
Professor Green
 
Posts: 2553
Joined: Fri Apr 17, 2015 1:10 pm
Location: Victoria
equipment: FSD 100 litre milk can with 2 x 2400W elements
FSD Neutraliser
FSD Carter Head
12 litre double boiler with 2400W element

Re: Ako's keg insulation progect

Postby Meatheadinc » Thu Jun 11, 2015 4:32 pm

5 o'clock wrote:Cool job Ako,

For those who have insulated their boilers like this, what is your experience regarding increased heating efficiency?

I have wrapped my keg in a thin layer of foam matting but not sure if I should go for something with better properties like this.

Appreciate any advice.

Thanks,

Richard


My wooden boiler shroud knocked about 15-20min off heat up time
Meatheadinc
 
Posts: 561
Joined: Thu Aug 29, 2013 9:00 pm
Location: Far North Coast NSW
equipment: 2" LM/VM on 30L boiler
4" FSD Neutraliser 50L boiler
4" carter head thump column
"Control Freak"- Semi Automation

Re: Ako's keg insulation progect

Postby 1 2many » Thu Jun 11, 2015 4:37 pm

Awesome job Ako looks fantastic. :clap: :clap: :handgestures-thumbupleft:
1 2many
Lifetime Member
 
Posts: 4217
Joined: Sun Jan 27, 2013 6:08 am
Location: Where the sun shines
equipment: Portable A.G brewery ,#001 5 STAR blockhead 4" Modular 4 plate SSG with,6"inline thumper, 2.5" 9 tube shotgun, packed section, Boiler 50 ltr inverted keg 4"still mount, 2.4 Kw FSD elements 1"drain.

Re: Ako's keg insulation progect

Postby Sam. » Thu Jun 11, 2015 4:52 pm

ako1978 wrote:Thanks guys just noticed I spelled project wrong


Fixed ;-)

Also top work on that shroud mate, one day when I go electric I might have to do the same :handgestures-thumbupleft:
Sam.
Lifetime Member
 
Posts: 10405
Joined: Sun Jul 17, 2011 7:19 pm
Location: South Oz Straya
equipment: Original FSD 5 plate 4 inch modular bubbler SSG with hand crafted plates and parrot by Mac.
18 Gal boiler.
2 x 2400W elements and power controller.
.

Re: Ako's keg insulation project

Postby Crusty » Thu Jun 11, 2015 7:47 pm

That looks really good mate.
Great work.
Crusty
 
Posts: 265
Joined: Wed Dec 12, 2012 9:42 pm
Location: Northern NSW.
equipment: 4" FSD Neutraliser
100lt Milk Can Boiler with 1 x 3600W & 1 x 2400w FSD elements
Head Brewer @The Wobbly Chook Brewing Company

Re: Ako's keg insulation project

Postby ako1978 » Thu Jun 11, 2015 8:16 pm

Thanks guys will post my results when I do a run on my next lot of days off .... :handgestures-thumbupleft: :handgestures-thumbupleft: :handgestures-thumbupleft: have some whisky to strip :D :D :D
ako1978
 
Posts: 19
Joined: Fri Jul 19, 2013 6:31 pm
Location: eyre pennisula
equipment: 50l keg boiler FSD MAC4 SSG and packed section

Next

Return to Boilers & burners.



Who is online

Users browsing this forum: No registered users and 7 guests

x