The Wood Fired Stripper.

[Redux]

Finished at last, i think i have posted some of the build pics somewhere but damned if i can find them..

Anyhoo.... here she is, on the hoist in run mode..

20230412_133631.jpg

and down low for travel and filling. The fill port is 1200mm high when in fill mode and 1800mm when in run mode..

20230412_133022.jpg

[Redux]

first, too stupid to add pics.... now they are sideways....

Fakkit, im off to fill up the boiler with vinegar and light the fire....

:laughing-rolling: :laughing-rolling: :laughing-rolling:

and maybe have a wee jar, for medicinal reasons.

[B-Man]

they show the right way when opened.

It looks Interesting

how long does it take to heat up.
is it jacketed or how is it setup?

[Redux]

they show the right way when opened.

It looks Interesting

how long does it take to heat up.
is it jacketed or how is it setup?

i put 50 litres in it today and it was almost exactly an hour from lighting to boiling....

not jacketed, just a firebox and chimney inside the boiler...

total capacity about 90 litres i think...

[Redux]

morning folks, time to test the latest iteration of the wood fired stripper.

20250119_092901.jpg

Since i ran it last ive added another condenser since it overpowers one and they dont work very well on an angle. The idea now is that the first sloped one will collapse the gas to a liquid (still hot) and then the 2nd (vertical) one will cool the liquid.

Also learned that im done with angel yeast on grain, its just too much of a pain in the ass...

20250119_092919.jpg

20250119_092929.jpg

20250119_092936.jpg

wish me luck!!