Aussiedistiller, Home Distilling, Moonshine, Home Brew

I'd go for 120L total volume, 100L useable... Strip your 180L of wash in two runs. :handgestures-thumbupleft:

She's gunna be quite the stripper!

Zak Griffin wrote:I'd go for 120L total volume, 100L useable... Strip your 180L of wash in two runs. :handgestures-thumbupleft:

She's gunna be quite the stripper!

:text-+1:

WTDist wrote:

Zak Griffin wrote:I'd go for 120L total volume, 100L useable... Strip your 180L of wash in two runs. :handgestures-thumbupleft:

She's gunna be quite the stripper!

:text-+1:

Pics or it didn't happen!

On the stripper that is...

Was a big night, 6 and a half hours of fab work!
And yes it happened!

We went for 100 L flat
As then I can just reach the bottom of the boiler for cleaning :) hahaha
I've got short arms

Tigging on the base, mate of mine can tig ! :)

And I spent the morning sanding and polishing :)

Well done mate that's a very nice peice of equipment :handgestures-thumbupleft:

And here is is all assembled!! :)
Now to build a bench to lift it all up :)
I also went with 100l as for now this will be my product still it seemed to make sence,
And hey another tank from th scrap yard is only $80 bucks or $3 a kg for stainless

Maaaaaate.

:dance: :music-deathmetal:

Nice build mate.

Cheers,
Prof. Green.

Professor Green wrote:Nice build mate.

Cheers,
Prof. Green.

:text-+1:

Mint! Sick looking unit !

120 sounds good if available. Four 25l batchs and some head room. I really want a 100l milk can but will prob end up with a 50l keg :handgestures-thumbdown:

Bugger i missed this whole page disregard my post about boiler noce work on the shotgun btw..

Picked up my 190l olive drums for my fermenters, the cleaning process has begun,
Go to Broome for a week on Wednesday to two more days of cleaning and then a good week and a half of airing hopefully will be clean enough and mostly smell less :) hahaha

bluc wrote: nice work on the shotgun btw..

:text-+1: I'm in the middle of making a 3" LM/VM column for my milkcan....I've got to the shotgun and stalled....not sure if you solder the small pipes first, then solder the plate into the outer pipe??

Check out macs guide :handgestures-thumbupleft:

Icefever wrote:

bluc wrote: nice work on the shotgun btw..

:text-+1: I'm in the middle of making a 3" LM/VM column for my milkcan....I've got to the shotgun and stalled....not sure if you solder the small pipes first, then solder the plate into the outer pipe??

I did the plates first then slid the pipes in, and soldered them, just need to be really carefull with heat

Another question, with fores do I take them out on a stripping run or just take out a lot more on the spirit run?
Cheers

Either way personally i ditch from strip and spirit run before i start collection.Way i see it better safe then sorry. Then i also ditch heads unless i am planning a feints run..