Another Pelican Build with a twist

Pot still design and discussion

Another Pelican Build with a twist

Postby Mcatac » Thu Jun 18, 2015 12:49 am

First off thanks to SBB for the original design and to Jeh for resurrecting it and to MacStill (5 Star for the fittings)
I have been busy the last few days building my new pot still, parrot and voltage controller.
Have just done a leak test and it all looks good, just wondering if I add a K type thermocouple probe now (have 3-4 in garage) or just learn to run it by touch, smell and feel.
Anyway have added a couple of changes to the original design after a bit of reading and research, one being the crimping of the inner tube on the Liebig to stop laminar
flow and reducing down to a 10mm outflow pipe. The other is putting a Tri-union to adjust the angle on the condenser which really works for me given the space I am working with. I also choose to go with the push on fittings on the condenser to utilise my existing T500 hoses.
Still have some 2" copper pipe left over, so am looking to maybe extend the column on my T500 reflux to try and get to the magic 96% ABV or open to suggestions.
You do not have the required permissions to view the files attached to this post.
Mcatac
 
Posts: 34
Joined: Tue Apr 28, 2015 11:48 am
Location: Beenleigh,QLD
equipment: Still Spirits T500 reflux column
T500 boiler with voltage controller
Pelican Pot and parrot with a twist

Re: Another Pelican Build with a twist

Postby jeh » Sun Jun 21, 2015 4:29 pm

Excellent rig Mcatac, wish i'd crimped the inner tube now :angry-banghead: , oh well i'll do it on the next one. What are you building next? Keep up the good work :handgestures-thumbupleft:
jeh
 
Posts: 32
Joined: Fri Jan 24, 2014 6:53 am
Location: Gold Coast Hinterland
equipment: Still Spirits T500
Home Built 2" Pot Still
Home Built 2" "Pelican" Stripping Still
Home Built Parrot

Re: Another Pelican Build with a twist

Postby Mcatac » Sun Jun 21, 2015 5:26 pm

Thanks mate, not quite sure maybe some sort of hybrid or was thinking of maybe making a shotgun to interchange with the Liebig to cut down stripping runs?
Better decide soon though because the wife is eyeing up the copper for BBQ flares
Mcatac
 
Posts: 34
Joined: Tue Apr 28, 2015 11:48 am
Location: Beenleigh,QLD
equipment: Still Spirits T500 reflux column
T500 boiler with voltage controller
Pelican Pot and parrot with a twist

Re: Another Pelican Build with a twist

Postby bluc » Tue Jun 23, 2015 9:41 pm

Nice work how did you crimp the pipe on the condenser?
bluc
Site Donor
 
Posts: 8967
Joined: Tue Apr 14, 2015 5:47 pm
Location: sunshine coast
equipment: 2" pot with 2" shotty 400mm long 5x 1/2" on a t500 boiler.
50l keg boiler 4" still mount 4" sight glass 1" drain..
4 plate 4" bubbler, 600mm packed section

Re: Another Pelican Build with a twist

Postby Mcatac » Wed Jun 24, 2015 6:20 am

I just used a pair of vise grips, that way all were crimped to the same depth. I checked on a scrap bit first that the 25mm would still fit over the inner. Think I went about 40-50mm centers 90° but what ever works. Seems to work alright, as even on full power on the T500 boiler I get a steady toothpick sized stream.
Mcatac
 
Posts: 34
Joined: Tue Apr 28, 2015 11:48 am
Location: Beenleigh,QLD
equipment: Still Spirits T500 reflux column
T500 boiler with voltage controller
Pelican Pot and parrot with a twist

Re: Another Pelican Build with a twist

Postby bluc » Wed Jun 24, 2015 10:03 am

Mcatac wrote:I just used a pair of vise grips, that way all were crimped to the same depth. I checked on a scrap bit first that the 25mm would still fit over the inner. Think I went about 40-50mm centers 90° but what ever works. Seems to work alright, as even on full power on the T500 boiler I get a steady toothpick sized stream.

How long at an estimate does it take to strip a wash? Looking at building something similar, would like to strip run fast..
bluc
Site Donor
 
Posts: 8967
Joined: Tue Apr 14, 2015 5:47 pm
Location: sunshine coast
equipment: 2" pot with 2" shotty 400mm long 5x 1/2" on a t500 boiler.
50l keg boiler 4" still mount 4" sight glass 1" drain..
4 plate 4" bubbler, 600mm packed section

Re: Another Pelican Build with a twist

Postby Zak Griffin » Wed Jun 24, 2015 10:10 am

Not sure how the design of the product condenser changes the speed of the boil? :think:
Zak Griffin
Lifetime Member
 
Posts: 6832
Joined: Mon Jul 15, 2013 9:34 pm
Location: Radelaide
equipment: "The Heart of Gold" - 4" Bubbler - finally bubbling!
"Zaphod" - 3" Pot - retired
"Agrajag" - 6" Bubbler - midlife crisis build?

Re: Another Pelican Build with a twist

Postby bluc » Wed Jun 24, 2015 10:36 am

Were the pot meets the boiler did you buy a ready made flange? If so were do you buy them? (I see your using a triclamp)
bluc
Site Donor
 
Posts: 8967
Joined: Tue Apr 14, 2015 5:47 pm
Location: sunshine coast
equipment: 2" pot with 2" shotty 400mm long 5x 1/2" on a t500 boiler.
50l keg boiler 4" still mount 4" sight glass 1" drain..
4 plate 4" bubbler, 600mm packed section

Re: Another Pelican Build with a twist

Postby Zak Griffin » Wed Jun 24, 2015 11:11 am

You want one of these - http://www.5stardistilling.net/t500-adapter/

It says they are out of stock, but give Mac a hoy through the webstore and I'm sure he'll sort you out :handgestures-thumbupleft:
Zak Griffin
Lifetime Member
 
Posts: 6832
Joined: Mon Jul 15, 2013 9:34 pm
Location: Radelaide
equipment: "The Heart of Gold" - 4" Bubbler - finally bubbling!
"Zaphod" - 3" Pot - retired
"Agrajag" - 6" Bubbler - midlife crisis build?

Re: Another Pelican Build with a twist

Postby bluc » Wed Jun 24, 2015 12:06 pm

That goes onto the boiler I thought? Was wondering what he did for a flange on end of still (or did he solder one of them to the still head also) if he made it or bought something ready made
bluc
Site Donor
 
Posts: 8967
Joined: Tue Apr 14, 2015 5:47 pm
Location: sunshine coast
equipment: 2" pot with 2" shotty 400mm long 5x 1/2" on a t500 boiler.
50l keg boiler 4" still mount 4" sight glass 1" drain..
4 plate 4" bubbler, 600mm packed section

Re: Another Pelican Build with a twist

Postby Zak Griffin » Wed Jun 24, 2015 12:15 pm

I'd guess he's used an easy flange. Have a search and you'll find heaps of threads on how to make one :handgestures-thumbupleft:
Zak Griffin
Lifetime Member
 
Posts: 6832
Joined: Mon Jul 15, 2013 9:34 pm
Location: Radelaide
equipment: "The Heart of Gold" - 4" Bubbler - finally bubbling!
"Zaphod" - 3" Pot - retired
"Agrajag" - 6" Bubbler - midlife crisis build?

Re: Another Pelican Build with a twist

Postby Professor Green » Wed Jun 24, 2015 1:32 pm

What does the pelican design do that other pot still designs don't?

Cheers,
Prof. Green.
Professor Green
 
Posts: 2483
Joined: Fri Apr 17, 2015 1:10 pm
Location: Victoria
equipment: FSD 100 litre milk can with 2 x 2400W elements
FSD Neutraliser
FSD Carter Head
12 litre double boiler with 2400W element

Re: Another Pelican Build with a twist

Postby bluc » Wed Jun 24, 2015 2:02 pm

Could be way off the mark but I think they use this design so the still is balanced on the thin t500 top to even out balance? the 2 inch pipe heading to the left balances the weight of the condenser on the right?
bluc
Site Donor
 
Posts: 8967
Joined: Tue Apr 14, 2015 5:47 pm
Location: sunshine coast
equipment: 2" pot with 2" shotty 400mm long 5x 1/2" on a t500 boiler.
50l keg boiler 4" still mount 4" sight glass 1" drain..
4 plate 4" bubbler, 600mm packed section

Re: Another Pelican Build with a twist

Postby punchy21 » Wed Jun 24, 2015 2:09 pm

bluc wrote:That goes onto the boiler I thought? Was wondering what he did for a flange on end of still (or did he solder one of them to the still head also) if he made it or bought something ready made


Check the 3rd pic, its an SS ferrule soldered into a 45˚ coupling... :handgestures-thumbupleft:
punchy21
 
Posts: 619
Images: 0
Joined: Fri Nov 04, 2011 11:56 am
Location: South West
equipment: Modular 4" 4 plate Bubbler
6kW 50L Boiler

Re: Another Pelican Build with a twist

Postby Mcatac » Wed Jun 24, 2015 7:56 pm

Sorry been flying back to work.
All adaptors were from Mac.I used one of the T500 adapters on top of the boiler. The end of the still has a stainless steel tri-clamp ferrule into a 50mm 45° bend same at the top. The design is SBB's and it seems to do 2 things, firstly yes it keeps the center of gravity above the center of the boiler, gives a bit of passive reflux and looks kind of cool.
Haven't done a full boiler run yet , only a couple of cleaning runs, but going off those I would say 2-2.5l per hour.
Will have a couple of 25l TPWs to run when I get home and will post.
Mcatac
 
Posts: 34
Joined: Tue Apr 28, 2015 11:48 am
Location: Beenleigh,QLD
equipment: Still Spirits T500 reflux column
T500 boiler with voltage controller
Pelican Pot and parrot with a twist

Re: Another Pelican Build with a twist

Postby Mcatac » Wed Jun 24, 2015 8:05 pm

The design of the condenser just induces turbulent flow into the vapour to stop a hot core of vapour just passing through the middle. This in theory means in will have more cooling power and use less water. This may mean that I can run the element at full power throughout the run. Will have to do some experiments and test 1 run at full noise and 1 controlling the element power.
Mcatac
 
Posts: 34
Joined: Tue Apr 28, 2015 11:48 am
Location: Beenleigh,QLD
equipment: Still Spirits T500 reflux column
T500 boiler with voltage controller
Pelican Pot and parrot with a twist

Re: Another Pelican Build with a twist

Postby Professor Green » Wed Jun 24, 2015 9:35 pm

So it's partly functional, partly practical and partly aesthetic.

Thanks,
Prof. Green.
Professor Green
 
Posts: 2483
Joined: Fri Apr 17, 2015 1:10 pm
Location: Victoria
equipment: FSD 100 litre milk can with 2 x 2400W elements
FSD Neutraliser
FSD Carter Head
12 litre double boiler with 2400W element

Re: Another Pelican Build with a twist

Postby Mcatac » Thu Jun 25, 2015 11:45 am

That's about the size of it Professor Green. Thinking about it this morning I may have been a bit light on my estimated stripping rates and put up what would be the spirit run. Looking at SBBs original post http://aussiedistiller.com.au/viewtopic ... it=pelican a stripping run should get 4+ p/h. Will have a play in 2 weeks when I get home.
Mcatac
 
Posts: 34
Joined: Tue Apr 28, 2015 11:48 am
Location: Beenleigh,QLD
equipment: Still Spirits T500 reflux column
T500 boiler with voltage controller
Pelican Pot and parrot with a twist

Re: Another Pelican Build with a twist

Postby bluc » Thu Jun 25, 2015 11:50 am

Thanks for the info looking at maybe doing the same build in a few weeks thanks for the info. By the way what size is your condenser? I read a post by macstill he said he made his 3/4 inside inch pipe at 700mm long I will probably follow his advice..
bluc
Site Donor
 
Posts: 8967
Joined: Tue Apr 14, 2015 5:47 pm
Location: sunshine coast
equipment: 2" pot with 2" shotty 400mm long 5x 1/2" on a t500 boiler.
50l keg boiler 4" still mount 4" sight glass 1" drain..
4 plate 4" bubbler, 600mm packed section

Re: Another Pelican Build with a twist

Postby WTDist » Thu Jun 25, 2015 12:00 pm

Mcatac wrote:I also choose to go with the push on fittings on the condenser to utilise my existing T500 hoses.


I wish to do the same with my build. I noticed the T500 reflux coil is 1/4" and the hoses go over that. My Shotgun RC and PC are going to have 1/2" inlet/outlet on them (incase i ever want to run outside) but I am wondering if there is a 1/2" to 1/4" reducer out there. I got most of my fittings from trade-link but they don't work with 1/4" and told me to try a air-con place.

Can i ask where you got your 1/4" tube and fittings from and if you have seen a 1/2' to 1/4" reducer? When i finish my mod i still want to run it on the bench with the kitchen tao and neddle valve thing. Looks like your just down the road at Beenleigh. Not to far from me
Cheers
WTD
WTDist
 
Posts: 2
Joined: Sun Oct 05, 2014 11:32 am
Location: Brisbane
equipment: Building a 4" bubbler with 8" glass thumper

Next

Return to Pot Stills



Who is online

Users browsing this forum: No registered users and 11 guests

x