Green Spirit

Discuss safety issues here.

Re: Green Spirit

Postby pulsetech » Sat Jun 21, 2014 4:38 pm

It's a strange one mate that's for sure
pulsetech
 
Posts: 425
Joined: Sun May 11, 2014 1:40 pm
equipment: 4"

Re: Green Spirit

Postby 1 2many » Sat Jun 21, 2014 8:26 pm

I really hope it just doesn't go away without getting to the bottom of it.


Yeah I agree , but I think this thread is a good culmination of symptoms and remedies and will become the answer to the problem,.. :handgestures-thumbupleft:
1 2many
Lifetime Member
 
Posts: 4217
Joined: Sun Jan 27, 2013 6:08 am
Location: Where the sun shines
equipment: Portable A.G brewery ,#001 5 STAR blockhead 4" Modular 4 plate SSG with,6"inline thumper, 2.5" 9 tube shotgun, packed section, Boiler 50 ltr inverted keg 4"still mount, 2.4 Kw FSD elements 1"drain.

Re: Green Spirit

Postby MacStill » Sat Jun 21, 2014 10:11 pm

I'm going to stick my neck out here and diagnose it.

My still gets filthy pretty quick when doing rums, and believe the cause is the vapor isn't crystal clear when leaving the boiler, the first tee ends up filthy progressively getting better up the column as the purifying is happening the tees become cleaner.

If your still was made entirely of copper all these impurities are sucked into the column rather than just creating a film of scum and nasty shit, a solvent like the fores & heads would be removing some of this crap on the next run, and if not refluxing this for a length of time could result in a little color coming through at the start.

I guess it opens some debate as to best materials, but that's not the point here...... run strategies are.

For a sparkly clean bling bit of SS still I like to start out on the most neutral of my runs, low wines, feints etc working my way through the wash's until I get to the manky black rum wash... I'm sure you's get the drift. :handgestures-thumbupleft:

So then (being that rum is my passion) I'll run my most common and filthiest shit through the column until I'm done, then strip down, clean etc. and the cycle begins again :handgestures-thumbupleft:

If I'm just dribbling shit doing a half arsed drunken job of trying to sound intelligent I'm sure you'll all get a laugh at least, but who knows if I'm right I could win an element & ya gotta be innit to winnit :teasing-blah:
MacStill
Lifetime Member
 
Posts: 16835
Joined: Fri Mar 18, 2011 1:40 pm
Location: Wide Bay QLD
equipment: Anything I choose :P

Re: Green Spirit

Postby TheMechwarrior » Sat Jun 21, 2014 10:44 pm

I don't know anything about the green daemon of which you all speak but I can agree with Mac in as much as I've only done 1 (100L) rum run and after that 1 run I was not happy to do another without doing a thorough clean. The first 2 plates in particular were noticeably like the "Great Unclean Daemon of Chaos" himself.
One swipe of the finger over the copper and I got that unmistakable effluvium....sulfides!

I sent forth the Inquisitors and they bathed the daemon in an acid bath bath of Holy Retribution (aka Citric acid), and it was good.

Now with the VM and neutrals I was happy to run for months without a decent clean so it all depends on your product as to how often you'll need to clean.
Inspect after each run and clean as often as you need :handgestures-thumbupleft:

Cheers,

Mech.
aka "The Black Templar - Emperor's Champion"
TheMechwarrior
 
Posts: 1007
Joined: Mon Dec 05, 2011 1:43 pm
Location: Tasmania
equipment: Five Star Distilling 6" neutraliser with
100L boiler

Re: Green Spirit

Postby Urrazeb » Tue Jun 24, 2014 3:11 pm

Ok I have seemed to have narrowed it down to the one wash.

This wash was a uj variant, the only difference being 2kg of pilsner malt and a sour corn starter.

Maybe the gren rum was carry over from this? Anyway... I'm going to try to replicate it either way.

I still haven't ran the rum that was coming out green but it was definitely lighter colour than this uj stuff.
Urrazeb
 
Posts: 2340
Joined: Fri Jul 27, 2012 8:42 am
Location: Perth
equipment: Column & pot

Re: Green Spirit

Postby TheMechwarrior » Tue Jun 24, 2014 3:37 pm

All good mate,

If you manage to replicate it let us know so we can all start working on what the root cause might be, failing a definitive solution one of us will replicate your "Tried and Proven" Green Spirit recipe ;-) Then perhaps along the way one of us may stumble upon the solution.

Cheers and good luck.

Mech.
TheMechwarrior
 
Posts: 1007
Joined: Mon Dec 05, 2011 1:43 pm
Location: Tasmania
equipment: Five Star Distilling 6" neutraliser with
100L boiler

Re: Green Spirit

Postby Urrazeb » Tue Jun 24, 2014 4:50 pm

Yeah thanks mate. I can't see pilsner malt being a problem as it's from a very reputable supplier.

But this next few months will be a process of elimination, removing/adding one ingredient at a time until it appears again. Im pretty sure it's not bacterial so I just hope I can get to the bottom of it
Urrazeb
 
Posts: 2340
Joined: Fri Jul 27, 2012 8:42 am
Location: Perth
equipment: Column & pot

Re: Green Spirit

Postby Sam. » Tue Jun 24, 2014 5:30 pm

I just noticed while washing out my cuts jars that one of the brands has a green tinge in the glass at the base but the others don't :-B

Might be worth a check, prob not the cause but can't hurt :handgestures-thumbupleft:
Sam.
Lifetime Member
 
Posts: 10405
Joined: Sun Jul 17, 2011 7:19 pm
Location: South Oz Straya
equipment: Original FSD 5 plate 4 inch modular bubbler SSG with hand crafted plates and parrot by Mac.
18 Gal boiler.
2 x 2400W elements and power controller.
.

Re: Green Spirit

Postby Urrazeb » Tue Jun 24, 2014 7:33 pm

This was one of my very first thoughts S&L but I use a variety of stubbies and the tinge is throughout all of them.

Even green in a carona bottle and a clear glass jar as well as a schooner glass too :handgestures-thumbdown:
Urrazeb
 
Posts: 2340
Joined: Fri Jul 27, 2012 8:42 am
Location: Perth
equipment: Column & pot

Previous

Return to Safety Discussion



Who is online

Users browsing this forum: No registered users and 16 guests

x