5 Star Store
Community Guidelines
Newbies Corner
Recipes
AD searchController for a 2400 watt element in a boiler
Forum rules
By participating in this section you acknowledge you are aware of aussiedistiller,com.au forum rules, policies & disclaimer.
If you are not aware please go to the rules section "before" you continue in this area of our forums.
"you expressly agree to hold aussiedistiller.com.au, Administration and moderator team, harmless for any property damage, personal injury and/or death, or any other loss or damage that may result from your use of the information or service provided here in and through out our forums"
the information found in our forums, are from many sources, qualified and un qualified as is the nature of the internet, and as such you use this information at your own risk. No liability directly or indirectly will be accepted by aussiedistillers.com.au, administration, the mod team or their heirs, whatsoever.
Regards,
aussiedistiller team.
By participating in this section you acknowledge you are aware of aussiedistiller,com.au forum rules, policies & disclaimer.
If you are not aware please go to the rules section "before" you continue in this area of our forums.
"you expressly agree to hold aussiedistiller.com.au, Administration and moderator team, harmless for any property damage, personal injury and/or death, or any other loss or damage that may result from your use of the information or service provided here in and through out our forums"
the information found in our forums, are from many sources, qualified and un qualified as is the nature of the internet, and as such you use this information at your own risk. No liability directly or indirectly will be accepted by aussiedistillers.com.au, administration, the mod team or their heirs, whatsoever.
Regards,
aussiedistiller team.
25 posts
• Page 2 of 2 • 1, 2
Re: Controller for a 2400 watt element in a boiler
by PeterC » Sat Jul 03, 2021 2:09 am
The element draws 2400W of power 10 Amps at 240V, the controller is rated to handle 4000W of power draw so will not be overloaded. Simple.
- PeterC
- Posts: 221
- Joined: Sun Feb 05, 2017 12:20 am
- Location: Perth WA
- equipment: An 18gall. (80L) keg boiler. A 50L Keg boiler. A 4 plate, 4 inch glass column, 500mm packed section Carter head. A 1.8L all copper micro still for small batches of Gin. Plus other bits.
Re: Controller for a 2400 watt element in a boiler
by clintonb » Sat Jul 03, 2021 3:41 pm
I can see where the confusion was. It read like he was going to have a 4000w and a 2400w element. Now it's all cleared up it makes sense :handgestures-thumbupleft:
- clintonb
- Posts: 46
- Joined: Wed Dec 20, 2017 10:03 pm
- Location: Victoria
- equipment: 118L SS boiler with a copper 4 Inch, 8 bubble plated column and a 650mm packed section complete with a carterhead and gin basket.
35L SS boiler with a copper 2 Inch pelican pot and gin basket.
Re: Controller for a 2400 watt element in a boiler
by ANTONY » Sun Jul 04, 2021 11:13 am
Thanks Stig
To clear it up.
I will be running a 2400w heating element . and a FSB 10 amp 4000w controller , Hopefully it makes sense now.
And i found a Sparky that can hook it all up . Hopefully there will be no Chernobyl
Antony
To clear it up.
I will be running a 2400w heating element . and a FSB 10 amp 4000w controller , Hopefully it makes sense now.
And i found a Sparky that can hook it all up . Hopefully there will be no Chernobyl
Antony
- ANTONY
- Posts: 38
- Joined: Sun Jul 30, 2017 9:32 am
- Location: CYGNET TASMANIA
- equipment: Home made copper Kentucky Still with thumper
Nixon Stone reflux still
Re: Controller for a 2400 watt element in a boiler
by The Stig » Sun Jul 04, 2021 5:27 pm
You’ll be right mate , just make sure the earth is good and solid :handgestures-thumbupleft:
- The Stig
- Site Nerd
- Posts: 18471
- Images: 9
- Joined: Sun Jun 19, 2011 8:37 am
- equipment: Only the Best will Do.
Mac4 SSG Bubbles of Joy
Re: Controller for a 2400 watt element in a boiler
by ANTONY » Tue Jul 06, 2021 1:31 pm
Sparky seems component . We shall see .
Thanks for ur help
Onwards into the fog .
Antony
Thanks for ur help
Onwards into the fog .
Antony
- ANTONY
- Posts: 38
- Joined: Sun Jul 30, 2017 9:32 am
- Location: CYGNET TASMANIA
- equipment: Home made copper Kentucky Still with thumper
Nixon Stone reflux still
25 posts
• Page 2 of 2 • 1, 2
Who is online
Users browsing this forum: No registered users and 2 guests