Thoughts on storing 40% in these

Discuss safety issues here.

Thoughts on storing 40% in these

Postby B-Man » Sat May 22, 2021 9:18 am

What's your thoughts on storing 40% abv in these bottles. Is the lid ok?
20210522_084029_copy_1209x1612.jpg
You do not have the required permissions to view the files attached to this post.
B-Man
 
Posts: 333
Joined: Tue Dec 24, 2019 1:07 pm
equipment: keg 4" Bubbler

Re: Thoughts on storing 40% in these

Postby Professor Green » Sat May 22, 2021 3:56 pm

Being a premix bottle, I think the seal will be some kind of plastic so I wouldn't trust it.

You could pull that seal out and replace it with one made out of silicon though. I'm sure there are threads around discussing making your own silicon seals.

Probably easier to get some new spirit bottles from the HBS or ask your mates to keep you some of their empty spirit bottles.
Professor Green
 
Posts: 2553
Joined: Fri Apr 17, 2015 1:10 pm
Location: Victoria
equipment: FSD 100 litre milk can with 2 x 2400W elements
FSD Neutraliser
FSD Carter Head
12 litre double boiler with 2400W element

Re: Thoughts on storing 40% in these

Postby B-Man » Sat May 22, 2021 7:37 pm

Yeah wasn't sure about the lids. just wanted some small bottle for samples/ takeaways.

I also have some 2L Flagons/Growlers but no lids anyone know where I can get some metal ones that don't cost me more in postage than the lids. only places i have seen do plastic ones.
B-Man
 
Posts: 333
Joined: Tue Dec 24, 2019 1:07 pm
equipment: keg 4" Bubbler

Re: Thoughts on storing 40% in these

Postby bluc » Sat May 22, 2021 7:43 pm

Buy corks or silicone bungs :handgestures-thumbupleft:
bluc
Site Donor
 
Posts: 9035
Joined: Tue Apr 14, 2015 5:47 pm
Location: sunshine coast
equipment: 2" pot with 2" shotty 400mm long 5x 1/2" on a t500 boiler.
50l keg boiler 4" still mount 4" sight glass 1" drain..
4 plate 4" bubbler, 600mm packed section

Re: Thoughts on storing 40% in these

Postby B-Man » Thu Jun 03, 2021 9:06 pm

Had some wine barrel silicone bungs so cut them down to fit. Worked a treat.

Cheers,
B-Man
 
Posts: 333
Joined: Tue Dec 24, 2019 1:07 pm
equipment: keg 4" Bubbler

Re: Thoughts on storing 40% in these

Postby scythe » Fri Jun 04, 2021 7:04 am

Just be careful cutting silicone.
Often the impervious nature of the silicone is based on how it is cured and the resulting surface.
But this might only apply to silicone with fillers, not sure about your wine bungs.
scythe
 
Posts: 1860
Joined: Thu Nov 14, 2013 6:34 am
Location: Central West NSW
equipment: Dreaming of a 4" bubbler

Re: Thoughts on storing 40% in these

Postby B-Man » Fri Jun 04, 2021 7:50 am

Yeah ok might give it a miss for storing in them atm then.
Had found another use. The bungs seal it from the dust etc and I just run my tails into them. Tails go into the feints keg so don't need to cap them with alcohol.
B-Man
 
Posts: 333
Joined: Tue Dec 24, 2019 1:07 pm
equipment: keg 4" Bubbler

Re: Thoughts on storing 40% in these

Postby southern45 » Fri Jun 04, 2021 9:14 am

The glass bottle will be fine of course, but personally I'd buy a bag of corks and use a cork lid instead.
southern45
 
Posts: 164
Joined: Mon Dec 10, 2018 2:50 pm
Location: Tasmania
equipment: Four plate 5-Star copper bubbler

Re: Thoughts on storing 40% in these

Postby Yonder » Fri Jun 04, 2021 3:06 pm

Buy a bag of ‘tasting’ corks or order a sheet of thin ptfe from a supplier like US Plastics; cut new liners for the screw on lids.
Yonder
Site Donor
 
Posts: 104
Joined: Thu Apr 19, 2018 3:38 pm
Location: Texas, of course
equipment: 10 gal copper pot w/doubler and a lot of enthusiasm

Re: Thoughts on storing 40% in these

Postby RC Al » Sun Jun 06, 2021 4:05 pm

Another option would be to source some thin SS foil, cut to size and use the original lid to sandwich it on.

Corks are easier :smile:
RC Al
Mentor
 
Posts: 1569
Joined: Mon Oct 23, 2017 4:58 pm
Location: Sunshine Coast Area
equipment: 3 plate 4" glasser
2" Potty

Re: Thoughts on storing 40% in these

Postby B-Man » Sat Jun 18, 2022 8:19 pm

I found some spirit bottle lids that fit the glass bottles. The thread is pretty close. If you over tighten it it does go righty loosey but does the job. No leaks
Last edited by B-Man on Sat Jun 18, 2022 8:19 pm, edited 1 time in total.
B-Man
 
Posts: 333
Joined: Tue Dec 24, 2019 1:07 pm
equipment: keg 4" Bubbler


Return to Safety Discussion



Who is online

Users browsing this forum: No registered users and 11 guests

x