Protect your back!

Discuss safety issues here.

Protect your back!

Postby TheMechwarrior » Tue Feb 11, 2014 11:16 pm

Has anyone come across this idea before for handling 50L kegs? I thought it looked great.
Image

Cheers,

Mech.
TheMechwarrior
 
Posts: 1007
Joined: Mon Dec 05, 2011 1:43 pm
Location: Tasmania
equipment: Five Star Distilling 6" neutraliser with
100L boiler

Re: Protect your back!

Postby Brendan » Tue Feb 11, 2014 11:31 pm

Looks like a great idea Mech!

I used I have the trouble of carting around near full kegs, but now I have a drain valve in the boiler it's not so much if a problem.

Trying to move even half full kegs around can be a big problem in your back though! :naughty:
Brendan
 
Posts: 2154
Joined: Mon Nov 21, 2011 5:06 pm
Location: Hunter Valley, NSW
equipment: 4.99L Essential oil extractor

Re: Protect your back!

Postby TheMechwarrior » Wed Feb 12, 2014 12:16 am

My back is already knackered so I thought I'd just take a look around and see what ideas where out there.

I'm still planning on getting the keg modified to include a drain.
TheMechwarrior
 
Posts: 1007
Joined: Mon Dec 05, 2011 1:43 pm
Location: Tasmania
equipment: Five Star Distilling 6" neutraliser with
100L boiler

Re: Protect your back!

Postby Sam. » Wed Feb 12, 2014 6:48 am

I use a moving trolley that has a strap and 3 wheels each side to go up steps :handgestures-thumbupleft:
Sam.
Lifetime Member
 
Posts: 10405
Joined: Sun Jul 17, 2011 7:19 pm
Location: South Oz Straya
equipment: Original FSD 5 plate 4 inch modular bubbler SSG with hand crafted plates and parrot by Mac.
18 Gal boiler.
2 x 2400W elements and power controller.
.

Re: Protect your back!

Postby Andy » Wed Feb 12, 2014 1:06 pm

sam_and_liv wrote:I use a moving trolley that has a strap and 3 wheels each side to go up steps :handgestures-thumbupleft:


ewwww steps!
Andy
 
Posts: 1466
Joined: Tue Aug 28, 2012 6:49 pm
Location: SOR, Perth
equipment: Copper Potstill on a 50L keg boiler with a 2200w element.
Doesn't get more simple then that

Re: Protect your back!

Postby Brendan » Wed Feb 12, 2014 1:13 pm

Andy wrote:
sam_and_liv wrote:I use a moving trolley that has a strap and 3 wheels each side to go up steps :handgestures-thumbupleft:


ewwww steps!


Yeah, you can keep that! :snooty:
Brendan
 
Posts: 2154
Joined: Mon Nov 21, 2011 5:06 pm
Location: Hunter Valley, NSW
equipment: 4.99L Essential oil extractor

Re: Protect your back!

Postby 1 2many » Wed Feb 12, 2014 2:53 pm

This is my version of the back protector :handgestures-thumbupleft:
It is a little bulky but it does the job.
Keg Fork.JPG
You do not have the required permissions to view the files attached to this post.
1 2many
Lifetime Member
 
Posts: 4217
Joined: Sun Jan 27, 2013 6:08 am
Location: Where the sun shines
equipment: Portable A.G brewery ,#001 5 STAR blockhead 4" Modular 4 plate SSG with,6"inline thumper, 2.5" 9 tube shotgun, packed section, Boiler 50 ltr inverted keg 4"still mount, 2.4 Kw FSD elements 1"drain.

Re: Protect your back!

Postby Smbjk » Wed Feb 12, 2014 5:47 pm

I use a skateboard :handgestures-thumbupleft: :laughing-rolling: then tip excess dunder in the shower :laughing-rolling: you should see the misses :scared-eek: :violence-smack:
Smbjk
 
Posts: 863
Joined: Fri Dec 14, 2012 11:22 pm
Location: Brisvegas
equipment: 50lt keg boiler with 2"boka
3" bubbler with 4 perf plates
All grain brewery ( Small Scale ) Keg Fridge
50lt keg boiler 2x2400w elements
Control box
Building fund is depleted

Re: Protect your back!

Postby Frothwizard » Wed Feb 12, 2014 6:05 pm

I cut a piece of melamine in half, screwed it together and put 4 casters on it. Only gotta lift the keg 3 inches off the ground and trolley does the rest.

Super jealous of that keg lifting trolley though, that is awesome.
Frothwizard
 
Posts: 418
Joined: Sun Sep 01, 2013 5:25 am
equipment: - Airstill
- FSD 4" 5 Plate Bubbler w/ Packed Section
- 50L Keg Boiler w/ 2 x 2400W Weldless Elements

Re: Protect your back!

Postby Urrazeb » Wed Feb 12, 2014 7:21 pm

I have bulged l5 and s1, it's shit as.. to move kegs I use a trolley with a strap. does the trick. Otherwise I get my mate to move em lol :shock:
Urrazeb
 
Posts: 2340
Joined: Fri Jul 27, 2012 8:42 am
Location: Perth
equipment: Column & pot

Re: Protect your back!

Postby Brendan » Wed Feb 12, 2014 8:48 pm

Just in case this helps anyone...

Best thing I ever did was install a drain valve. I have an SS hose barb sticking out of the boiler which I can slide a tube over and run it out to the drain...that way I'm only ever moving empty kegs. Then just give the tube a flush with water immediately :handgestures-thumbupleft:
Brendan
 
Posts: 2154
Joined: Mon Nov 21, 2011 5:06 pm
Location: Hunter Valley, NSW
equipment: 4.99L Essential oil extractor

Re: Protect your back!

Postby crow » Wed Feb 12, 2014 9:34 pm

I just carried the 50 ltr jobbies :handgestures-thumbupleft: , the 18 gal bugger has a drain as that would be to heavy to carry any distance
crow
 
Posts: 2363
Joined: Tue Mar 13, 2012 1:44 am
Location: Central Highlands Victoria
equipment: ultra pure reflux still and a 4" 4 plate MacStill built copper bubble cap column and a 500mm scoria packed rectifying module

Re: Protect your back!

Postby Yummyrum » Wed Feb 12, 2014 10:26 pm

We've all carried full kegs I'm sure but it fucks your back.
I don't do it alone now..I get a lift from a friend.

As much as plastic safety and electrical safety and don't sell don't tell is high priority so should our backs be ....just sayin..keep the hobbie safe .. :handgestures-thumbupleft:
Yummyrum
 
Posts: 1897
Joined: Fri Dec 28, 2012 3:19 pm
Location: Near Coffs
equipment: Did use Still Spirits Reflux
Now use 50l Keg with Pot head for Rum and Neutral stripping runs on gas .
LM/VM head with 1m packed 2" on Still Spirits boiler for Neutrals.

Re: Protect your back!

Postby MacStill » Wed Feb 12, 2014 11:46 pm

yeah it aint much fun walking around like a half open pocket knife :))
MacStill
Lifetime Member
 
Posts: 16835
Joined: Fri Mar 18, 2011 1:40 pm
Location: Wide Bay QLD
equipment: Anything I choose :P

Re: Protect your back!

Postby crow » Thu Feb 13, 2014 3:05 pm

Yeah ok it was a bit tongue and cheek but by the same token I just spent 2 days pushing barrow after barrow of concrete prolly weighing over 200 kgs each 30 odd degrees up a sandy hill about 10 meters so its all relative hey (meaning it would be similar to carrying 500 kegs of beer two at a time ;-) ) :handgestures-thumbupleft:
crow
 
Posts: 2363
Joined: Tue Mar 13, 2012 1:44 am
Location: Central Highlands Victoria
equipment: ultra pure reflux still and a 4" 4 plate MacStill built copper bubble cap column and a 500mm scoria packed rectifying module

Re: Protect your back!

Postby TheMechwarrior » Thu Feb 13, 2014 4:51 pm

Urrazeb wrote:I have bulged l5 and s1, it's shit as.. to move kegs I use a trolley with a strap. does the trick. Otherwise I get my mate to move em lol :shock:

L5 S1 is my problem as well, "marked disc space narrowing", it can be a real pain in the arse :laughing-rolling: :angry-banghead: :violence-smack:
TheMechwarrior
 
Posts: 1007
Joined: Mon Dec 05, 2011 1:43 pm
Location: Tasmania
equipment: Five Star Distilling 6" neutraliser with
100L boiler

Re: Protect your back!

Postby Sam. » Thu Feb 13, 2014 9:56 pm

Brendan wrote:
Andy wrote:
sam_and_liv wrote:I use a moving trolley that has a strap and 3 wheels each side to go up steps :handgestures-thumbupleft:


ewwww steps!


Yeah, you can keep that! :snooty:


Yeah it's not ideal but my stilling area is on the other side of the house to my brewing area :handgestures-thumbdown:

Only need to cart it one way full then drain it in place :handgestures-thumbupleft:

Don't worry my next place will be much better equipped ;-)
Sam.
Lifetime Member
 
Posts: 10405
Joined: Sun Jul 17, 2011 7:19 pm
Location: South Oz Straya
equipment: Original FSD 5 plate 4 inch modular bubbler SSG with hand crafted plates and parrot by Mac.
18 Gal boiler.
2 x 2400W elements and power controller.
.


Return to Safety Discussion



Who is online

Users browsing this forum: No registered users and 19 guests

x